- (+62) 21 5966 6369
- (+62) 811 900 1211
- info@packtest.co.id
- Distributor PackTest Indonesia
Menu
Menu
Ini adalah peralatan untuk mengukur kekuatan ikatan serat internal Paper Board dengan mengukur gaya yang dibutuhkan untuk memisahkan lapisan / lapisan.
Nilai Ply Bond yang tinggi menunjukkan papan yang padat dan kuat yang akan menghasilkan Inti Kertas dan Karton Bergelombang berkualitas tinggi.
Cocok untuk: Papan Kertas.
Dikonfirmasi ke: TAPPI T-541
Untuk informasi lebih lanjut tentang harga, produk mesin dan kebutuhan lainnya.
Mohon Hubungi ke Sales kami di
+62 811 900 1211
Mohon Email ke info@unitek-indonesia.com atau info@packtest.co.id
| Ply Bond Tester (ZDT Type) Model # PBT-100S (Also known as ZDT Tester or Z-Direction Tensile). Single Column Design Compact Model Measures force required to de-laminate the plies. Digital Model with Backlit LCD Display for easy readibility. Suitable to test the Internal Bond Strength of Paper / Board as per TAPPI 541 This machine gives results in KN/M2 or kPa or psi and NOT in Joules (J/M2) | ||
| Capacity : | 100 Kgf / 1000 N | |
| Least Count : | 10 gf / 0.01 Kgf / 0.1 N | |
| With Peak hold facility. Without Deflection / Elongation Measurement Preset Automatic Ply Bond Test Cycle. Choice of Measurement units : Kg / Lbs / N / KN (Usersettable from Menu) Auto-Calibration facility at 10 Kg (Dead Weights of 5 Kg x 2 nos, for calibration to be supplied by the buyer) | ||
| Test Speed : | Auto-Reducing 50 →10→1 mm/min in Ply Bond Mode (Compression Stroke) 66 mm/min in Ply Bond Model (Tension Stroke) 12.5 ± 0.25 mm/min in Ring Crush Test Mode (Compression Mode) 100 ± 5 mm/min in Idle / Jog Speed. | |
| With Stepper Motor & Drive for Precise Speed Control.
Travel length : >75 mm. | ||
| Optional Module : Facility to perform RCT (Ring Crush Test for Paper) Inclusive of Testing Adopter and Sample Cutting Template. | ||
| Utilities Required (To be supplied by the buyer) : | ||
| 1. | Power Supply : 230/110 Volts AC at 50/60 Hz. (Fluctuation Free Power required) | |
| 2. | 2 Cast Iron Weights of 5 Kg each. These weights are required for calibration at the time of installation and then every 6-months for routine calibrations. | |
| Note : Computerised Model (PBT-100S-DX) also available | ||
| Software | With Software, Without Software |
|---|---|
| RCT Fixture | With RCT Fixture, Without RCT Fixture |
(sebelumnya Test Techno Consultants), didirikan pada tahun 1989 dan telah menjadi produsen & eksportir Terkemuka di India, Peralatan Pengujian Jaminan Kualitas untuk Industri Pengemasan.
Bizlink Citra Raya Blok P.03 No.106, Jl.Pemda Tigaraksa Sukamulya Cikupa Tangerang, Banten 15710, Indonesia
K-1, 601/2&3, GIDC Ranoli, Vadodara – 391350.Gujarat. INDIA
