(10-90% of capacity)

(5-100% of capacity)

Platform Size Options :

INCLUDES : An Air Filter cum Regulator to ensure long working life to the machine.

Utilities Required (To be supplied by the buyer) :

• Power Supply : 110/230 Volts AC at 60/50 Hz. (Fluctuation Free Power required)

• Compressed Air supply at 5 – 6 kg/cm2 (Rust, Dirt and Moisture Free Supply)

• 50 Kg Cast Iron Weights (In any combination. Preferably, 10kg x 5 nos). These weights are required for calibration at the time of installation and then every 6-months for routine calibrations.

Note :

• Other platform sizes also available.

• Computerised Model (P500DDX) also available

• IQOQ / Validation Documentation Set available for Pharmaceutical Companies

HSN CODE : 9024.80.10

Platform Size Options :

INCLUDES : An Air Filter cum Regulator to ensure long working life to the machine.

Utilities Required (To be supplied by the buyer) :

• Power Supply : 110/230 Volts AC at 60/50 Hz. (Fluctuation Free Power required)

• Compressed Air supply at 5 – 6 kg/cm2 (Rust, Dirt and Moisture Free Supply)

• 100 Kg Cast Iron Weights (In any combination. Preferably, 20kg x 5 nos). These weights are required for calibration at the time of installation and then every 6-months for routine calibrations.

Note :

• Other platform sizes also available.

• Computerised Model (P1000DDX) also available

• IQOQ / Validation Documentation Set available for Pharmaceutical Companies

HSN CODE : 9024.80.10

Platform Size Options :

INCLUDES : An Air Filter cum Regulator to ensure long working life to the machine.

Utilities Required (To be supplied by the buyer) :

• Power Supply : 110/230 Volts AC at 60/50 Hz. (Fluctuation Free Power required)

• Compressed Air supply at 5 – 6 kg/cm2 (Rust, Dirt and Moisture Free Supply)

• 200 Kg Cast Iron Weights (In any combination. Preferably, 20kg x 10 nos). These weights are required for calibration at the time of installation and then every 6-months for routine calibrations.

Note :

• Other platform sizes also available.

• Computerised Model (P2000DDX) also available

• IQOQ / Validation Documentation Set available for Pharmaceutical Companies

HSN CODE : 9024.80.10

Digital Electro – Pneumatic model.
Digital Model with Backlit LCD Display for easy readibility.
Direct Display of Load / Collapsing Force. No Calculations Required.
Auto-stop upon completion of Test.
Testing Principle : Constant Rate of Loading
With non-destructive testing facility for cartons at predetermined load.
User Selectable Test Units : Kgf / Lbf / N

Full Controls and Calibration function via computer.

–        Test Report (with Load vs Time Graph) Printing facility.

–        Calibration Report Printing facility.

( Includes Software and Linking Hardware. PC & Printer to be provided by you. )

Platform Size Options :

INCLUDES : An Air Filter cum Regulator to ensure long working life to the machine.

Utilities Required (To be supplied by the buyer) :

• Power Supply : 110/230 Volts AC at 60/50 Hz. (Fluctuation Free Power required)

• Compressed Air supply at 5 – 6 kg/cm2 (Rust, Dirt and Moisture Free Supply)

• 50 Kg Cast Iron Weights (In any combination. Preferably, 10kg x 5 nos). These weights are required for calibration at the time of installation and then every 6-months for routine calibrations.

• Desktop PC or Laptop PC

Processor Type :         Intel Core I3 or better. (Preferably Core I5 or Higher)

Memory :                    4 GB RAM or better

Space :                        50 GB free HDD space           (minimum)

Monitor :                     17″ or larger Color Monitor with 1280 x 1024 resolution or better

Operating System:      Windows 7 Home Premium or higher (with latest updates & patches)

Supporting Software : Adobe Acrobat Reader                       (Latest Version).

Microsoft Dot Net Framework           (Latest Version)

Printer :                       Laser or Inkjet Printer.           (No Dot-matrix support)

Note :

• Other platform sizes also available.

• The machine can work in Computerised Mode (with PC) and Standalone Mode (without PC).

• IQOQ / Validation Documentation Set available for Pharmaceutical Companies

HSN CODE : 9024.80.10

Digital Electro – Pneumatic model.
Digital Model with Backlit LCD Display for easy readibility.
Direct Display of Load / Collapsing Force. No Calculations Required.
Auto-stop upon completion of Test.
Testing Principle : Constant Rate of Loading
With non-destructive testing facility for cartons at predetermined load.
User Selectable Test Units : Kgf / Lbf / N

Full Controls and Calibration function via computer.

–        Test Report (with Load vs Time Graph) Printing facility.

–        Calibration Report Printing facility.

( Includes Software and Linking Hardware. PC & Printer to be provided by you. )

Platform Size Options :

INCLUDES : An Air Filter cum Regulator to ensure long working life to the machine.

Utilities Required (To be supplied by the buyer) :

• Power Supply : 110/230 Volts AC at 60/50 Hz. (Fluctuation Free Power required)

• Compressed Air supply at 5 – 6 kg/cm2 (Rust, Dirt and Moisture Free Supply)

• 100 Kg Cast Iron Weights (In any combination. Preferably, 20kg x 5 nos). These weights are required for calibration at the time of installation and then every 6-months for routine calibrations.

• Desktop PC or Laptop PC

Processor Type :         Intel Core I3 or better. (Preferably Core I5 or Higher)

Memory :                    4 GB RAM or better

Space :                        50 GB free HDD space           (minimum)

Monitor :                     17″ or larger Color Monitor with 1280 x 1024 resolution or better

Operating System:      Windows 7 Home Premium or higher (with latest updates & patches)

Supporting Software : Adobe Acrobat Reader                       (Latest Version).

Microsoft Dot Net Framework           (Latest Version)

Printer :                       Laser or Inkjet Printer.           (No Dot-matrix support)

Note :

• Other platform sizes also available.

• The machine can work in Computerised Mode (with PC) and Standalone Mode (without PC).

• IQOQ / Validation Documentation Set available for Pharmaceutical Companies

HSN CODE : 9024.80.10

Digital Electro – Pneumatic model.
Digital Model with Backlit LCD Display for easy readibility.
Direct Display of Load / Collapsing Force. No Calculations Required.
Auto-stop upon completion of Test.
Testing Principle : Constant Rate of Loading
With non-destructive testing facility for cartons at predetermined load.
User Selectable Test Units : Kgf / Lbf / N

Full Controls and Calibration function via computer.

–        Test Report (with Load vs Time Graph) Printing facility.

–        Calibration Report Printing facility.

( Includes Software and Linking Hardware. PC & Printer to be provided by you. )

Platform Size Options :

INCLUDES : An Air Filter cum Regulator to ensure long working life to the machine.

Utilities Required (To be supplied by the buyer) :

• Power Supply : 110/230 Volts AC at 60/50 Hz. (Fluctuation Free Power required)

• Compressed Air supply at 5 – 6 kg/cm2 (Rust, Dirt and Moisture Free Supply)

• 200 Kg Cast Iron Weights (In any combination. Preferably, 20kg x 10 nos). These weights are required for calibration at the time of installation and then every 6-months for routine calibrations.

• Desktop PC or Laptop PC

Processor Type :         Intel Core I3 or better. (Preferably Core I5 or Higher)

Memory :                    4 GB RAM or better

Space :                        50 GB free HDD space           (minimum)

Monitor :                     17″ or larger Color Monitor with 1280 x 1024 resolution or better

Operating System:      Windows 7 Home Premium or higher (with latest updates & patches)

Supporting Software : Adobe Acrobat Reader                       (Latest Version).

Microsoft Dot Net Framework           (Latest Version)

• Printer :                       Laser or Inkjet Printer.           (No Dot-matrix support)

Note :

• Other platform sizes also available.

• The machine can work in Computerised Mode (with PC) and Standalone Mode (without PC).

• IQOQ / Validation Documentation Set available for Pharmaceutical Companies

HSN CODE : 9024.80.10

Fully Automatic Model with Computer Controlled operations.

Electro-Mechanical model with Twin, Ball Screw drive.

Confirms to TAPPI / B.I.S. / ISO / ASTM Standards

Special Design :

–        1 Heavy Duty Ball-Screw and 2 Linear Guides running vertically across each side of the machine. The central beam is mounted between the 2 Ball Screws and 4 Linear Guides.

–        The moving platen is then hung underneath the Central Beam using a universal joint and will give a freely floating platen ( as per TAPPI T 804).

–        There is no separate Height Adjustment and Compression Platen.

–        The Lower platen is always fixed / stationary and the top platen moves to adjust height as well as perform compression test.

–        Provision is provided to lock the platen to convert it from Free-Floating to Fixed Platen type (as per TAPPI T 804).

–        Time required for locking the platen : 2-5 minutes.

Benefits of Ball Screw design :

1)     Very low power consumption

2)     Very low friction

3)     Very low wear & tear of moving parts.

4)     Very low noise level.

5)     Minimal Maintenance (only slight greasing of screw is required every 2-3 months).

Direct Display of Load / Collapsing Force. No Calculations Required.

Auto-stop upon completion of Test (Sample Failure)

Auto-stop upon completion of Test (Load or Deflection Setpoint achieved)

Testing Principle : Constant Rate of Travel @ 12.5 ± 2.5 mm/min  Confirms to TAPPI T-804

Variable Speed :

1)     Test Speed :                12.5 ± 2.5        mm/min          (Range 10-100mm/min)

2)     Jog / Idle Speed :                    100 (approx)   mm/min

Hi-Speed Microprocessor based Controller

With 2 Line, Backlit LCD Display for easy readability.

–        First Line shows Load / Force Readings.

–        Second Line shows Deflection / Compression with least count of 0.1 mm

Confirms to TAPPI T-804

Test Facility available :

1)     Destructive Test          (Load till destroy)

2)     Non-Destructive Test with Load Setpoint and Deflection Setpoint (Machine will stop automatically on any setpoint that gets activated first)

Drive Mechanism :

Hybrid Stepper Motor with Digital Stepper Drive

Full Controls and Calibration function via computer.

–        Test Report (with Load vs Time Graph) Printing facility.

–        Calibration Report Printing facility.

( Includes Software and Linking Hardware. PC & Printer to be provided by you. )

Platform Size Options :

INCLUDES : An Air Filter cum Regulator to ensure long working life to the machine.

Utilities Required (To be supplied by the buyer) :

• Power Supply : 110/230 Volts AC at 60/50 Hz. (Fluctuation Free Power required)

• Compressed Air supply at 5 – 6 kg/cm2 (Rust, Dirt and Moisture Free Supply)

• 50 Kg Cast Iron Weights (In any combination. Preferably, 10kg x 5 nos). These weights are required for calibration at the time of installation and then every 6-months for routine calibrations.

• Desktop PC or Laptop PC

Processor Type :         Intel Core I3 or better. (Preferably Core I5 or Higher)

Memory :                    4 GB RAM or better

Space :                        50 GB free HDD space           (minimum)

Monitor :                     17″ or larger Color Monitor with 1280 x 1024 resolution or better

Operating System:      Windows 7 Home Premium or higher (with latest updates & patches)

Supporting Software : Adobe Acrobat Reader                       (Latest Version).

Microsoft Dot Net Framework           (Latest Version)

Printer :                       Laser or Inkjet Printer.           (No Dot-matrix support)

Note :

• Other platform sizes also available.

• The machine can work in Computerised Mode (with PC) and Standalone Mode (without PC).

• IQOQ / Validation Documentation Set available for Pharmaceutical Companies

HSN CODE : 9024.80.10

Fully Automatic Model with Computer Controlled operations.

Electro-Mechanical model with Twin, Ball Screw drive.

Confirms to TAPPI / B.I.S. / ISO / ASTM Standards

Special Design :

–        1 Heavy Duty Ball-Screw and 2 Linear Guides running vertically across each side of the machine. The central beam is mounted between the 2 Ball Screws and 4 Linear Guides.

–        The moving platen is then hung underneath the Central Beam using a universal joint and will give a freely floating platen ( as per TAPPI T 804).

–        There is no separate Height Adjustment and Compression Platen.

–        The Lower platen is always fixed / stationary and the top platen moves to adjust height as well as perform compression test.

–        Provision is provided to lock the platen to convert it from Free-Floating to Fixed Platen type (as per TAPPI T 804).

–        Time required for locking the platen : 2-5 minutes.

Benefits of Ball Screw design :

1)     Very low power consumption

2)     Very low friction

3)     Very low wear & tear of moving parts.

4)     Very low noise level.

5)     Minimal Maintenance (only slight greasing of screw is required every 2-3 months).

Direct Display of Load / Collapsing Force. No Calculations Required.

Auto-stop upon completion of Test (Sample Failure)

Auto-stop upon completion of Test (Load or Deflection Setpoint achieved)

Testing Principle : Constant Rate of Travel @ 12.5 ± 2.5 mm/min  Confirms to TAPPI T-804

Variable Speed :

1)     Test Speed :                12.5 ± 2.5        mm/min          (Range 10-100mm/min)

2)     Jog / Idle Speed :                    100 (approx)   mm/min

Hi-Speed Microprocessor based Controller

With 2 Line, Backlit LCD Display for easy readability.

–        First Line shows Load / Force Readings.

–        Second Line shows Deflection / Compression with least count of 0.1 mm

Confirms to TAPPI T-804

Test Facility available :

1)     Destructive Test          (Load till destroy)

2)     Non-Destructive Test with Load Setpoint and Deflection Setpoint (Machine will stop automatically on any setpoint that gets activated first)

Drive Mechanism :

Hybrid Stepper Motor with Digital Stepper Drive

Full Controls and Calibration function via computer.

–        Test Report (with Load vs Time Graph) Printing facility.

–        Calibration Report Printing facility.

( Includes Software and Linking Hardware. PC & Printer to be provided by you. )

Platform Size Options :

INCLUDES : An Air Filter cum Regulator to ensure long working life to the machine.

Utilities Required (To be supplied by the buyer) :

• Power Supply : 110/230 Volts AC at 60/50 Hz. (Fluctuation Free Power required)

• Compressed Air supply at 5 – 6 kg/cm2 (Rust, Dirt and Moisture Free Supply)

• 100 Kg Cast Iron Weights (In any combination. Preferably, 20kg x 5 nos). These weights are required for calibration at the time of installation and then every 6-months for routine calibrations.

• Desktop PC or Laptop PC

Processor Type :         Intel Core I3 or better. (Preferably Core I5 or Higher)

Memory :                    4 GB RAM or better

Space :                        50 GB free HDD space           (minimum)

Monitor :                     17″ or larger Color Monitor with 1280 x 1024 resolution or better

Operating System:      Windows 7 Home Premium or higher (with latest updates & patches)

Supporting Software : Adobe Acrobat Reader                       (Latest Version).

Microsoft Dot Net Framework           (Latest Version)

Printer :                       Laser or Inkjet Printer.           (No Dot-matrix support)

Note :

• Other platform sizes also available.

• The machine can work in Computerised Mode (with PC) and Standalone Mode (without PC).

• IQOQ / Validation Documentation Set available for Pharmaceutical Companies

HSN CODE : 9024.80.10

Fully Automatic Model with Computer Controlled operations.

Electro-Mechanical model with Twin, Ball Screw drive.

Confirms to TAPPI / B.I.S. / ISO / ASTM Standards

Special Design :

–        1 Heavy Duty Ball-Screw and 2 Linear Guides running vertically across each side of the machine. The central beam is mounted between the 2 Ball Screws and 4 Linear Guides.

–        The moving platen is then hung underneath the Central Beam using a universal joint and will give a freely floating platen ( as per TAPPI T 804).

–        There is no separate Height Adjustment and Compression Platen.

–        The Lower platen is always fixed / stationary and the top platen moves to adjust height as well as perform compression test.

–        Provision is provided to lock the platen to convert it from Free-Floating to Fixed Platen type (as per TAPPI T 804).

–        Time required for locking the platen : 2-5 minutes.

Benefits of Ball Screw design :

1)     Very low power consumption

2)     Very low friction

3)     Very low wear & tear of moving parts.

4)     Very low noise level.

5)     Minimal Maintenance (only slight greasing of screw is required every 2-3 months).

Direct Display of Load / Collapsing Force. No Calculations Required.

Auto-stop upon completion of Test (Sample Failure)

Auto-stop upon completion of Test (Load or Deflection Setpoint achieved)

Testing Principle : Constant Rate of Travel @ 12.5 ± 2.5 mm/min  Confirms to TAPPI T-804

Variable Speed :

1)     Test Speed :                12.5 ± 2.5        mm/min          (Range 10-100mm/min)

2)     Jog / Idle Speed :                    100 (approx)   mm/min

Hi-Speed Microprocessor based Controller

With 2 Line, Backlit LCD Display for easy readability.

–        First Line shows Load / Force Readings.

–        Second Line shows Deflection / Compression with least count of 0.1 mm

Confirms to TAPPI T-804

Test Facility available :

1)     Destructive Test          (Load till destroy)

2)     Non-Destructive Test with Load Setpoint and Deflection Setpoint (Machine will stop automatically on any setpoint that gets activated first)

Drive Mechanism :

Hybrid Stepper Motor with Digital Stepper Drive

Full Controls and Calibration function via computer.

–        Test Report (with Load vs Time Graph) Printing facility.

–        Calibration Report Printing facility.

( Includes Software and Linking Hardware. PC & Printer to be provided by you. )

Platform Size Options :

INCLUDES : An Air Filter cum Regulator to ensure long working life to the machine.

Utilities Required (To be supplied by the buyer) :

• Power Supply : 110/230 Volts AC at 60/50 Hz. (Fluctuation Free Power required)

• Compressed Air supply at 5 – 6 kg/cm2 (Rust, Dirt and Moisture Free Supply)

• 200 Kg Cast Iron Weights (In any combination. Preferably, 20kg x 10 nos). These weights are required for calibration at the time of installation and then every 6-months for routine calibrations.

• Desktop PC or Laptop PC

Processor Type :         Intel Core I3 or better. (Preferably Core I5 or Higher)

Memory :                    4 GB RAM or better

Space :                        50 GB free HDD space           (minimum)

Monitor :                     17″ or larger Color Monitor with 1280 x 1024 resolution or better

Operating System:      Windows 7 Home Premium or higher (with latest updates & patches)

Supporting Software : Adobe Acrobat Reader                       (Latest Version).

Microsoft Dot Net Framework           (Latest Version)

Printer :                       Laser or Inkjet Printer.           (No Dot-matrix support)

Note :

• Other platform sizes also available.

• The machine can work in Computerised Mode (with PC) and Standalone Mode (without PC).

• IQOQ / Validation Documentation Set available for Pharmaceutical Companies

HSN CODE : 9024.80.10